1.2379 – D2 – F521

Steel with high non-deformability and high cutting capacity, suitable for: dies, reamers, gauges, circular saws, drills, plastic molds, dies, blades, borcas and screw cores, cold forming rollers, measuring tools, rail

Pretreated alloy steel. Good resistance and toughness for pieces with dimensions up to 400 mm. of thickness. It can be flame quenched and nitrided. Easy machining, better polished than quality

Steel for the manufacture of springs of great responsibility. Torsion bars, screwdrivers, two-mouth wrenches, etc. Due to the addition of Vanadium it presents a very fine grain and as a

High speed steel for universal use ( M2 ): chip removal, roughing and finishing tools, drill bits, milling machine tools, taps, dies, reamers, wood blades, circular saws. Additionally, this material

Martensitic stainless steel with moderate maintenance of cutting edges and good polishability. It is used in the manufacture of domestic cutlery and surgical instruments. Molds and extrusion lips for the

Hot work steel, subjected to great demands, especially for the transformation of light materials (aluminum, zinc, etc.), punches and dies for stamping, containers, hot cutting blades.

Steel for machine parts that must have good resistance, shafts, sleeves, crankshafts, barrels, transmissions.

Steel for the chemical industry, household appliances, food, ornamentation, reactors and equipment for the nuclear industry, liquid oxygen tanks. It is non-magnetic and weldable.

Free machining steel. The resistance to corrosion is practically equivalent to that of A-304 steels, with low sulfur content. The machinability of this steel is 25-35% higher than that of

D2 (1.2379) O2(1.2842) A440B(1.4112)

Steel for the chemical, photography, textile, paper, food industry and all those industries that use acids and alkalis at temperatures below 550º C. It is non-magnetic and weldable.

VG-10 ® is a registered trademark of Takefu Special Steel (Japan). When we choose a steel for different types of knives, the final requirements are different, but the prerequisites are

Steel for parts with great external hardness, good resistance and toughness in the core. The surface hardness once nitrided ranges from 1000 to 1100 Vickers. It is used for shafts,

Steel for parts with great superficial hardness and average resistance in the core of 80-110 Kgrs. mm2 after cemented and tempered, such as gears, gearboxes, pinions, cams, bolts and ball

Steel for parts that must have good resistance and at the same time good resilience even in great thicknesses, shafts, crankshafts and in general parts that must withstand great fatigue,

Silver 1.2210 steel is the material for universal use cold work applications, of which we have a greater variety of rectified (round) measures. The main characteristics of this tool steel

The same applications as F-211, with the particularity that the cutting speed is higher, due to the addition of lead (Pb) in the composition. Although the resistance is somewhat higher

Steel for screws, bolts, bushings, fittings, etc., and in general parts in large series that must be machined on automatic lathes.

Free-machining material with a Rockwell C hardness of approx. 32. Eliminates subsequent heat treatment and avoids second operations after machining.

Steel for parts with great superficial hardness and medium strength in the core. Gears of gearboxes, piston rods, gears, cams, pinions, bolts and ball joints.

Basic, weldable, high manganese steel.

Material calibrated by stretching hot rolled bars, increasing its elastic limit and mechanical resistance.

Ideal for long life bearings used with little or no lubricant. Up to ten times more durable than other traditional bearing materials. Vesconite ® and its improved version Vesconite Hilube

Material calibrated by turning (h9) and subsidized. Variety (42CrMoS4) with guaranteed minimum Sulfur (S) content (0.020 – 0.040), to facilitate chip removal. Suitable where high resistance and tenacity demands are

Easy machining material (Lead) suitable for tempering. Applicable for parts machined on CNC lathes that require a heat treatment to increase their final hardness. Pieces with a high resistance to

Steel for parts that must have a high resistance to hot oxidation, air heaters, furnace elements, annealing pots, cementation boxes. Moulds, rods, tongs for the glass industry. As oxidation resistant

16MnCr5, 20MnCr5 and 21MnCr5 steels are cementation steels with improved mechanical properties thanks to the presence of alloying elements such as chromium and molybdenum. These steels undergo a surface hardening

Design steel with Niobium (Niolox) quenchable in oil, with great hardness and great durability of the edges, with resistance to corrosion. Fine-grained steel with an additive for the formation of

Martensitic stainless steel with better edge retention capacity and resistance to breakage. Professional cutlery. In the food processing industry, such as: frozen slicers, knives for beef and pork, perforated discs

APPLICATIONS: Hydraulics, valves and guides. pump bodies and rotors, press tools, gears and pinions, steel rollers, bushings for non-ferrous metals, guide plugs, corrosion resistant parts, model plates. Pulleys, rolling guides,