Company description Since 1900 the family owned HEICO group has offered its customers reliable and high-quality solutions in the field of fastening technology and can thus draw on extensive technical know-how. Starting with the production and distribution of nails, mainly for the furniture industry, the product portfolio of HEICO has continuously expanded over the years. At the beginning of the 1990s, HEICO started production of customer-specific, drawing-related cold forged parts. These parts are mainly distributed to the automotive industry with customers including Audi, VW and BMW. With management of the company passing to the fourth generation of the family in 2006 the product range was significantly enhanced again by the HEICO-LOCK® product group and the HEICO-TEC® Tension Nut. The highest degree of vertical integration through in-house tool and machine construction, in-house heat treatments and surface refinements, as well as a continuous process control system, have always characterized the quality philosophy of the HEICO group. Products: Even under extremes of vibration or dynamic loads, the HEICO-LOCK® Wedge Locking System provides maximum reliability. When the bolt is tightened, the external radial teeth of the HEICO-LOCK® Wedge Lock System embed themselves in an interlocking fashion with the respective mating surface. If the securing system is subject to dynamic stress, movement is only possible between the internal washer surfaces. This results in an increase in the clamping force.  Certified system for securing bolts, working at low and high preload levels  Particularly suitable for dynamic loads – including when using lubricants  Can be re-used  Very easy to install and remove (wedge lock washers are supplied as a pre-assembled pair)  Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nuts  Available in steel or stainless steel with narrow or wide bearing surfaces – other materials are available upon request  Available from M3 – M76 and ¼” – 3” - custom sizes upon request News: For a secure joint with a HEICO-TEC® Tension Nut, no electric, hydraulic, or pneumatic tools are needed. All you need is a torque wrench. The HEICO-TEC® Tension Nut is unique in the fact that the pretension force of the large main thread is distributed to many smaller pressure bolts. Because the pressure bolts are smaller, a conventional torque wrench can be used to achieve the correct pretension force. This eliminates the need for complex, bulky, or heavy tools and makes securing large bolted joints more convenient and easy.

HIDRALAIR is the leading industrial supply company located in Vilanova del Vallès. Our goal is to provide high value-added services and improve supplies for professionals, small and medium-sized enterprises, and multinationals in Catalonia and the rest of Spain. With a clear customer orientation, a proven experience of more than 50 years in the market, a close, clear, and accessible approach, we offer our clients a wide range of material assets: 3,500m2 of facilities and more than 60,000 references in stock. Our main asset is our human team, sector specialists to ensure high quality, price, and delivery service.

Company dedicated to lifting and transport equipment for more than 50 years.

Ineo is a company dedicated to the manufacture of short series, prototypes and final parts. We manufacture using Additive Manufacturing technologies (3D printing, SLS Laser Sintering, Stereolithography SLA and FDM) and other technologies such as Machining (CNC), Rapid Tooling, Metal Pressing and vacuum casting. We accompany our customers from the development of their idea or project to the selection of the most realistic materials and finishes, to get the pieces that suit their needs.

Engineering, Process and Product Industrialisation. Deep Drawing, Stamping and Processing in Stainless Steel. 3D Laser Cutting and Welding. Robotized Welding. Innovation and Experience in Metal, since 1970. Matriçats is a subcontracting company that leads the market for cold processing of stainless steel. We are a team that is experienced in a variety of disciplines and sectors, with extensive technical expertise, a high production capacity and a constant eye for innovation. - SOLUTIONS + SERVICES: At Matriçats we have organised our services into three distinct business lines, in order to meet the needs of our customers with the maximum speed and efficiency: product and process design, process industrialisation and serial production. 1. Product and process DESIGN. We create or adapt the design of the product under study, always seeking the best possible balance between meeting the requirements of the customer and keeping production costs to a minimum. Based on the design agreed with the customer, we develop the manufacturing process. 2. Process INDUSTRIALISATION. We have a workshop with the resources required to industrialise the manufacturing process, where the tooling and dies included in the process design are constructed and adapted. This area is also available for subsequent maintenance of the tooling, dies, automated equipment and special machines. 3. Serial PRODUCTION. We offer exclusive production techniques within the sector of drawing stainless steel and other metals. These are suitable for small, medium or large production batches. Hydraulic and mechanical presses (tonnage up to 2,000t, table dimensions up to 2,600mm). Special capacity for deep drawing up to 600mm and thicknesses up to 20mm. Ancillary technologies such as 3D laser cutting and welding stations, automatic and conventional welding stations and finishing stations. - RESOURCES AND TECHNOLOGIES: * Hydraulic and mechanical presses special presses for deep drawing + stamping + cutting We offer our customers a range of hydraulic and mechanical presses of different tonnages and table dimensions, which are exceptional for a company of our characteristics: thicknesses of 0.5mm to 20mm, deep drawing up to 600mm, press tables up to 2,600mm, tonnage up to 2,000t with a hydraulic press and up to 650t with a mechanical press. If the project so requires, we can implement automated systems. * 3D laser cutting and welding stations We have three 3D laser cutting and welding stations, with which we can apply innovative techniques to the processes we undertake. Thanks to these technologies, we can satisfactorily support work involving dies, especially in short or medium batches, and complete special 3D laser cutting and welding projects. * Automated equipment and TIG welding and processing equipment. Collaborative Robotics. We work with automated TIG welding + resistance welding with a press + condenser unloading and transformation welding equipment, with which we are able to join different materials of various shapes. * Rolling, cutting, edge rolling and multi-processing operations We have a multi-processing centre operating on an axial basis, thanks to which we can increase the possibilities of diemaking work. * Finishing and degreasing section. We have a degreasing tunnel to satisfy the finish requirements on the parts. * CAD/CAE/CAM/CNC systems design and programming We have CAD/CAE/CAM/CNC tools for product and process engineering. We collaborate closely with the suppliers of these high technology tools in order to obtain the very best performance from them and to optimise their use. * CNC and conventional lathes and milling cutters process industrialisation With the assistance of our diemaking workshop, we offer the possibility of undertaking global projects, from design through to product manufacture. We have a wide range of machinery to cover process industrialisation needs, including the manufacture of tooling, dies, automated equipment and special machines, as well as their specific maintenance. * Conventional or portable 3D measuring equipment dimensional control We have a 3D coordinate measuring machine (CMM) and conventional measuring equipment. We perform dimensional control tasks on prototype parts, serial production parts and special parts. * 3D laser digitisation equipment reverse engineering and dimensional control The portable CMM equipment includes a 3D laser probe for the digitisation of actual parts. This technology is useful for the dimensional control of parts and in reverse engineering tasks. The digitisation provides us with a precise catalogue of virtual parts, based on the digital processing of actual sample parts, thereby avoiding the need for a physical warehouse. * Automated equipment and special machines specific applications We offer automated equipment engineering and industrialisation. We construct special elements, tools and machines, which are not directly available on the market, in order to make the processes more viable, achieving extraordinary results. - SECTORS: Matriçats’ customers are found in a great variety of sectors. The services and solutions that we offer satisfy the potential needs of many different sectors, all of which seek a quality product that will efficiently meet their requirements at a minimum cost. Transport + Water and Air Use sector Automotive + Railway + Aeronautical + Naval Sector Food industry + HORECA sector Energy + Renewable Energies sector Health + Hospital + Pharmaceutical sector Chemical + Petrochemical sector Agricultural + Livestock sector Construction + Furniture and Fittings + Street Furniture sector * CERTIFICATIONS: We have a management system by processes and departments that integrates the disciplines of Quality Management, Environmental Management, and Occupational Safety and Health Management. Certification ISO 9001-2015. Since 2003, we have held ISO 9001 certification, awarded by Bureau Veritas. We also obtain approval certificates from our customers in each of the many areas, sectors and disciplines in which we work.

MOTA HERRAMIENTAS S.L. is a company dedicated exclusively to the manufacture of professional tools. With products that combine quality, design with excellent performance for the most demanding uses and excellent performance. Our vocation is to provide consumers and hardware distributors with a high degree of satisfaction. With technically reliable products at very competitive prices, offering a lifetime warranty on hand tools and an excellent cost-benefit ratio in all our lines. In our plants located in Barcelona, Spain, we keep a permanent stock to meet the demand of our distributors at national level and in the rest of the world. Our team is totally consubstantiated with the basic guidelines of the company, and in this way, our group of professionals has developed a very efficient work taking MOTA HERRAMIENTAS S.L. to a high technical level of production and quality, of which we are proud all of us who integrate the firm. Official sponsor of the DAKAR 2014-2018 and South American World Cup qualifiers. Learn more about our company: http://mota.com.es/empresa.htm

With over 40 years of experience in the industrial industry, Opac is a modern, dynamic company that has the ability to adapt to tough demands from different markets across the world. Our dedication, commitment and excitement have remained intact since we began operations and we continue generating added value for our customers and collaborators.

Rex Nordic Group is a European market leader in mobile heating, cooling, and power solutions for professional use.