It is a lightweight and compact device provided with superior safety hook which facilitates quick installation. It is an ideal device for a wide range of use as construction, agriculture, industry etc. · Cable guide. · Hook safety. · Hook with belt pulle bending load. · Keypad1,5.-mts

The electronic perfectControl calibrating unitwith its electric drive considerably reduces the amount of effort and time required for calibration and adjustment tasks on torquewrenches. - measurement possible without moving the point of application of force. - prevents faulty readings thanks to precision-mounted spindle and finely regulated motor. - extremely accurate calibration thanks to optimised bearings and square drives for the transducers. - rapid, easy change of transducers thanks to quick-release latching system. - convenient pushbutton controls for clockwise and anticlockwise measurements with automatic speed compensation. - saves time because the bridge support is locked in place using a single-handed eccentric lever. - transmission of readings to a PC via USB interface for further processing, analysis and archiving. - calibration certificates can be printed or saved as a PDF file after calibration. - as found / as left calibrations can be documented. - during calibration, DIN EN ISO 6789 in numerous languages is supported. Additional standards and works standards are available on request. - can be upgraded to perfectControl calibrating unit No 7794-3 for angle-controlled wrenches.

From master production planning to on-site quality control, Odoo digitally transforms your entire production line. 🔧 Smart, Real-Time Planning Simulate manufacturing orders, check material availability, and decide whether to make, buy, subcontract, or transfer from another warehouse—all from a visual, dynamic dashboard. 📊 MES & Operational Control Monitor every stage of production with intuitive MES tools. Record output, minimize errors, accelerate workflows, and keep working even without an internet connection. 🛠️ Maintenance & Quality Management Automate preventive and corrective maintenance. Apply Six Sigma and Kaizen with configurable checkpoints, statistical analysis, and direct feedback from operators. 🔍 Integrated PLM & Full Traceability Manage product versions and BOMs, and track every lot or serial number with one click. Fully compatible with IoT for industrial automation and smart device integration. 📱 Mobile App & Barcode Scanner Streamline operations with interfaces built for mobile devices and industrial barcode readers.

Materials: Aluminum Oxide / Silicon Carbide / Zirconium. Sizes: 115 mm Grits: 40 - 60 - 80 - 120 Max. RPM: 13300 Application: For sanding wood and ferrous materials, stainless steel, iron, granite, glass and stone.

The “BT” model JAGUAR multiposition clamps is equippe d with an articulated lifting ring for lifting, turning over or vertically tr ansporting steel plates whilst maintaining total gripping force on the opening, · The lever-activated safety closing device located on one side of the device makes it easier to grip the load without any hassles. · The lever, fitted with a strong spring, keeps the load safely blocked even when supported and there is no tension in the ring.· The jaws are made of tempered steel, with a toothed surface. They grip the part to be transported in apositive and effective manner,thereby obtaining the optimum results.· The hardness of the steel plates tobe lifted should not be higher than HRC 37 (HB- 345). The minimum work load should not belower than 7.5% of the maximum workload. The lifting capacity and opening areetched sideways on the body.

AMADA's new EML 2515 AJ combined punching/fiber laser machine, streamlining production and reducing costs. How? Allowing to implement different part designs and producing them efficiently and profitably. 6 phases in the same process: - Punching - Laser - Drawings - Threaded - Countersunk - Bent

With the 516 telescopic ratchet, Stahlwille is expanding its ½" ratchet range. This new tool "Made in Germany" was developed primarily for use in the commercial vehicle sector as well as for bolt-tightening operations on industrial installations. In these environments, fasteners often have to be tightened with higher forces. The new ratchet complies with DIN 3122/ISO 3315 and is dimensioned for torques up to 512 Nm. It is therefore recommended for professional users who frequently work with high torques. Thanks to the telescopic shaft, it is particularly versatile – even in difficult spaces with limited room to move. The shaft of the ratchet can be adjusted in five steps from 410 mm to 630 mm, where each step is 55 mm. The variable length opens up additional application possibilities where the use of a ratchet is not normally possible or only possible to a limited extent. The extension action is fast and safe thanks to the slide bearings and endstop protection. The length is conveniently adjusted by means of a rocker at the front end of the shaft. The ratchet drive is tested in compliance with DIN, has 36 teeth and transmits high tightening forces of up to 512 Nm absolutely reliably to screws and nuts. The change-over switch for right and left rotation is located on the top of the head in a slight recess. Accidental change-over, for example when coming into contact with components, is thus prevented. The ½" square drive can be fitted with all the usual sockets and bits. The two-component convex handle of the 516 telescopic ratchet fits snugly in the hand – an important prerequisite for longer, fatigue-free work. The materials used provide a secure grip even when hands are dirty or wet. In addition, the grip components are resistant to oils, greases, brake fluids and Skydrol, a hydraulic fluid used in the aviation sector.

The Nitrogen gas springs patented by Bordignon meet the requirements of all sizes. They comply with ISO 11901 standard, as well as many other models with higher performance or up to three times greater resistance, all while having much more compact sizes. The reduction in mold size translates to lower production costs and, consequently, improved productivity, benefiting both mold makers and manufacturers.

Excellent – when good gets even better. The No 17 Open-Ratch combined open-jaw & ring ratchet spanner is now also available in 21, 22 and 24 mm. The integrated ratchet with a double hexagon for clockwise or anticlockwise use has a working angle of 5°. The chrome-plated surface with the rounded STAHLWILLE finish provides sufficient grip even with dirty hands. And the best thing is the tool is now also available as No 17F in sizes from 9-24 mm as a flat version. Both ring ratchet spanners (17 and 17F) are available in a convenient set in a robust roll-up wallet - or in individual sizes. Strong and extremely tough. There are many spanners available. But hardly any that are as well thought out as STAHLWILLE spanners. The non-slip finish means all our spanners fit comfortably in the hand, even when used for long periods of time and when higher forces are applied. Lighter. The thumb groove along the spanner handle eliminates material where there is no stress and concentrates it where it is needed. Similar to the principle of an H-beam in construction, extreme load-bearing capacity and maximum flexural strength are achieved with lower weight. More precise. Our very tight manufacturing tolerances and reproducible dimensional accuracy ensure that one STAHLWILLE spanner is as close-fitting as the next. In this way, both open-jaw and ring spanners will always firmly hug the fastener head – for excellent power-lock. More robust. When force is applied to a spanner, the greatest force acts on the area between the jaw and the shank, which is why STAHLWILLE spanners are reinforced at this point. The special design makes the load zones more resilient, which reduces the risk of breakage to a minimum.

Products to be added soon, we will have them so you can check the quality guarantee as well as their excellent presentation.